1×4 LED Panel Light
Our ultra thin 40w 1×4 LED flat panel light is a perfect replacement of outdated 80w-120w lay in 1 by 4 fluorescent troffer fixtures. With the edge lit LED technology, it can give your living places or office room very soft ambience, no glaring effect to eyes. The two color temperature 5000K daylight white would bring you some cold feeling, looks brighter, while 4000K natural white some warm feeling.
|Item||1×4 LED Panel Light|
|Input voltage||100-277VAC 50/60HZ|
|CCT||4000K natural white / 5000K daylight white|
|Chip brand||Epistar SMD2835 LEDs|
|Driver brand||Li-Fud driver|
|Housing finish color||white frame|
|Housing material||ultra thin & sturdy die cast aluminum|
|IP grade||IP40 dustproof & shakeproof for dry location|
|Mounting types||recessed / lay in /grid drop ceiling in default, surface mount kits and suspended mount kits optional|
|Light pattern||edge-lit chips, more even and soft light beams|
|Equivalent of fluorescent tube, troffer||80W-120W 1×4 light fixtures|
|Beam angle||180 degree|
|Certificate||CE RoHS, UL/cUL approved, DLC listed|
For residential & commercial construction building ceiling recessed lighting
- Office, convenience store, laundry room, shop lighting
- Kindergarten, school & university classroom, conference room, library lighting ;
- Parking garage ceiling tile, home gym lighting ;
- Household kitchen, hotel hallway, closet, basement lighting
Other Similar LED Panel Light for sale
- 2 x 4 LED flat panel light
- 2×2 CCT tunable LED light panel
Frequently Asked Questions
Do you manufacture battery backup for the 300mmx1200mm LED panel light ?
Yes, we offer 15W emergency battery for our 1×4 drop ceiling lights, it is for sale in our store.
How to choose between edge lit LED panel light VS backlit LED panel lights ?
Our LED flat panel is edge lit version, because the LED chips are soldering on the four edges of the light panel frame, a light guide plate(LGP) is used to make the light more uniform because of there are many reflections and finally direct the light downward.
Regarding the backlit LED light panel, its LED chips are mounted on the back of the panel, lightbeam is directly downward without reflection, so you can notice many lightspots when the light is turned on, it is glaring to the eyes and may cause disconfort. Besides, its aluminum profile is usually thicker than edge lit panel light.
If the ceiling is very shallow or you need a lightweight fixture or you require confortable lighting for your working/living areas, it is better to go edge lit panel light.
If budget is your priority, you can go backlit flat panel light.
Do you have any wiring diagram instruction for this 1 x 4 LED flat panel light ? how does it wire to the 0-10 volt dimmer ?
You can check our spec sheet and take a look at the installation guide for details.