Square Light Pole
The straight square light pole is built from hard steel tube and are available side drilled for arm direct mount area light fixtures or with tenon mounts for shoebox light and post light. Typical area lighting applications include highway, industrial parks, schools and universities parking lot, public plazas and airports, office and medical facilities street, residential garden or yard. Mounting heights of 10 to 30 foot can be used based on selected luminaire application.
Conforms to ASTM-A 500
Grade B: Minimum yield strength of 46,000 PSI.
Galvanized architectural bronze powder coat finish
Paint adhesion, hardness and durability.
Anchor bolts are included, sized based on pole data charts for the selected pole size.
Cast iron reinforced hand hole and cover with ground screw.
Poles are provided with a two-piece formed steel base cover that is easily assembled and fitted over pole base.
Poles are available in standard lengths as shown in the order matrix. Poles can be custom cut to order. Consult our factory.
Standard length poles include 2⅜” OD tenon, side drilled [email protected] Degrees, polycarbonate top cover and hole plugs for unused drilling locations.
Cut to order poles may also be ordered with 2⅜˝ OD Tenons for use with post top decorative outdoor light, slip fitter fixtures, or any of a wide variety of pole top mounting accessories.
Our standard equipment is to make a top adapter with 2.5 inches. There is no opening on the top of the light pole. If straight arm installation is needed, the top adapter shall be removed and holes shall be opened on the wall of the light pole.
Finally, seal the top with a plastic rainproof cover.